IceToolz Bearing Cup Press Tool, BB30-BB86-BB92-BB386, 11R3

The IceToolz bottom bracket press is an indispensable tool in the workshop. To prevent wear on bearings, and more importantly: the shaft, it is very important that the bearings are mounted completely flat in relation to each other. You can do that with these crank presses. Fast and professional. The IceToolz bottom bracket press has an ergonomic handle.

Almost all press-in bearings can be mounted with this IceToolz bottom bracket press. Below is a summary in the knowledge that there are probably already a few bottom bracket types missing. Developments are going very fast and every bicycle manufacturer develops its own bottom bracket. In general, all bottom brackets fit, both the 24mm version and the 30mm version. The IceToolz bottom bracket press also takes into account the Sram GXP® bottom bracket, in other words, the 22mm variant can also be pressed in flat with this bottom bracket press.
By mounting the bearings 100% flat with this bottom bracket press, bearings are prevented from squeaking and crunching. Wear of the bearings is also limited by mounting them parallel to each other. Perhaps even more important: this also prevents the bottom bracket from wearing out. The IceToolz bottom bracket press can therefore prevent a lot of misery.
The IceToolz bottom bracket press is suitable for:
BB30, BB86, BB89, BB90, BB91, BB92, Sram GXP®, BB386, PressFit and more.

IceToolz: the choice of professionals and do-it-yourselfers!