IceToolz Cable and Spoke Cutter, Pro Shop, 67A5

This patented IceToolz cable and spoke cutter is a unique pair of pliers with a multitude of possibilities. The small opening effortlessly cuts through everything with a diameter smaller than 3.5mm. The cable and spoke cutter can also handle spokes without any difficulty. The way of cutting is suitable for inner cables. The inner cables are not pressed flat and therefore removed from the structure. The outer cables are also no problem for the larger opening of the cable and spoke cutter. And the kevlar cable grommet, which is somewhat bent after cutting, can be repaired in one go with these pliers by means of the pin in the orange cap on the cable and spoke cutter. In addition to these functions, it is also possible to mount both sizes of end caps on the inner and outer cable. 

This cable and spoke cutter from IceToolz is a unique and patented cutter that, due to its cutting method, is primarily suitable for cutting both inner and outer cables. Because the cable and spoke cutter cuts around the inner cable, towards the center, the individual wires of the inner cable remain in their original twisted structure and no protruding wires are hindered when feeding the inner cable into the outer casing. In addition, this cable and spoke cutter is of such a quality that the cable and spoke cutter has no problem cutting through a spoke. The larger opening is suitable for cutting the outer cable and the orange tab can be used to get the Kevlar cable grommet nice and round again after cutting.
The two end caps for both outer and inner cables can also be clamped onto the cable without damaging anything with the special openings of these cable and spoke cutters

IceToolz: the choice of professionals and do-it-yourselfers!